Specifications :

Power :

Power supply from 12 to 28VDC/150mA

Via the USB port if the analog inputs/outputs are not used.

  

Specs of outputs:

Outputs 1 to 3: 50V/50mA optocoupler, A common point.

Outputs CK1 to CK3, D1 to D3: TTL output 5V/20mA max

Specs of inputs:

Inputs 1 to 6: 0 to 32V max. High level from 3.5V. Programmable filter from 0 to 150ms.

Inputs 7 to 10: 0 to 32V max. High level from 3.5V. Programmable filter from 0 to 150ms.

Note: Inputs IN1 to IN10 are compatible with NPN or PNP type sensors (positive or negative logic)

One TTL incremental encoder input or 2 fast counter inputs.

ENABLE input: Emergency stop function. 0 to 32V max. High level from 3.5V.

Analog inputs/outputs:

2 analog inputs AI1 to AI2: 0 to 10V. 1M impedance, 10 bit resolution.

2 analog outputs AO1 and AO2: 0 to 10V. 10 bit resolution.

Interfaces de communication :

USB 2.0 High Speed,

RS485 half duplex, MODBUS RTU protocol.

DMX 512 on RS485 protocol

Performance:

Frequency of motor control pulses: 200KHz

32 KB command buffer (i.e. up to 1500 movement commands)

Software compatibility:

MACH3

GALAAD,

MultiCN,

Labview (VI delivered with the board for USB and Modbus)

API communication USB également disponible.

Technical sheet:

Voltage 12V à 28VDC

Length 100mm

Width 30mm

Depth 90mm

USB communication: Yes

RS232 communication: No

RS485 communication: Yes. MODBUS RTU protocol

Incremental encoder input: 1

Analog outputs: 2

PLC functions: Yes

Number of axes: 3

Pulse frequency 200KHz

Number of inputs: 10

Number of outputs: 3

Analog inputs: 2